Preparing The Cables - Pioneer PDK-1011 Mode D'emploi

Preparing the Cables

Use the enclosed cable binders to bind the cables.
Note
Be very careful not to apply force to the bases of the cables.
6
En
Using the cable binders
1
Gathering cables and placing them on the
cable binder.
2
Passing the cable binder through the hole
on its end.
3
Pulling the end of the cable binder to
secure the cables.
Removing a cable binder
If the secured part is removed
from the cable binder hole, it is
unlocked.
Hole
Secured
part