Calesco Waterbed Mode D'emploi page 4

TIMER ACTIVATED MODE
In order to switch from the timer deactivated
to the timer activated mode, press the
and both the
TEMPERATURE (FIG 2A)
To change the temperature, press the
button until the black square
surrounds the icon. Now press the
button while adjusting the temperature
with the buttons. The bar graph
refills continuously until the
heating element has been switched off by
the timer off function.
SETTING THE CLOCK (FIG 2B)
For the timer to work correctly, it is important
to set the clock to the correct time. To
set the clock, press the
the black square surounds the
Now press the
the time with the
IMPORTANT!
If the control device is unplugged, it
will remember the time the clock was
set to for a short period of time. There
is however no guarantee that the time
will not be reset if the device has been
unplugged.
4
buttons for 1 second.
button until
icon.
button while adjusting
buttons.
TIMER ON (FIG 2C)
To set the start time for heating the element,
press the
square surrounds the
Now press the
the time with the
TIMER OFF (FIG 2D)
To set the end time for heating the element,
press the
black square surrounds the
press the button while adjusting the
time with the
button until the black
icon.
button while adjusting
buttons.
button until the
icon. Now
buttons.