Connecting The Power Cord (1) - Pioneer AVIC-Z1 Manuel D'installation

Connecting the System

Connecting the power cord (1)

Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Front speaker
Left
Rear speaker
or Subwoofer
11
Note:
Cords for this navigation system and those for other products may be
different colors even if they have the same function. When connecting
this navigation system to another product, refer to the supplied manuals
of both products and connect cords that have the same function.
Fuse (10 A)
White
+
≠
White/black
Green
+
≠
Green/black
Note:
When a subwoofer is connected to this navigation system
instead of a rear speaker, change the rear output setting in
the Initial Setting. (Refer to the Operation Manual.) The
subwoofer output of this navigation system is monaural.
Gray
+
≠
Gray/black
Violet
+
≠
Violet/black
Front speaker
Right
Rear speaker
or Subwoofer