AEG MC 4412 CD/MP3 Mode D'emploi & Garantie page 52

Playing CDs/MP3
This is how you play a CD
1. Press the FUNCTION button (6/8) repeatedly until „CD"
appears in the display.
2. In order to open the CD compartment (11), press the OPEN/
CLOSE (open) button (12).
3. Insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place and then
close the lid of the CD compartment.
4. AUDIO CDs:
In the display the symbols "CD" appear together with the
number of tracks and the total playing time. Press the PLAY/
PAUSE button (14/1) to play back the CD. The CD is played
from the fi rst track onwards. The track currently being played
and the time that has elapsed are shown in the display.
CDs in MP3 Format:
„STOP", „MP3" appears in the display with the total number
of tracks. „STOP", „MP3" appears in the display with the
total number of tracks. Press the PLAY/PAUSE key (14/1)
to play the CD. The CD is played back from the fi rst track
onwards and from the fi rst folder. The song currently being
played and the time that has elapsed are shown in the
display.
5. To remove a CD, press the STOP key (16) (2 on the remote
control), open the CD deck with the OPEN/CLOSE (open)
key (12) and take out the CD carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted incorrectly or no disc is inserted, the
letters „CD READ", and „NO DISC" appear in the display.
• Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
Description of the CD buttons
PLAY/PAUSE (14/1)
You can briefl y interrupt and resume playback using this button.
The playing time that has elapsed fl ashes in the display. Pres-
sing again continues playback.
SKIP+ I/SKIP- I (8/3)
With an audio CD or a CD in MP3 format playing:
With SKIP+ I (8/3) you can jump to the next or previous
track etc. If the button is kept pressed down, the machine starts
to search through the tracks (
The SKIP- I button (8/3) can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc. If the button
is kept pressed down, the machine starts to
search through the tracks (
remote control).
52
05-MC 4412 AEG 52
(4) on the remote control).
(4) on the
In radio mode:
SKIP+/SKIP-: To tune the desired radio station.
I/I : For selecting the stored radio stations.
STOP (16/2)
1. The CD stops.
2. USB-CARD Switching:
Press the button in CARD USB mode to switch between the
USB connection and the card slot.
MUTE (9 on the remote control)
Used for switching off the sound immediately. The word „MUTE"
appears in the display. To cancel this function, press the MUTE
key again.
EQ/FLAT/ROCK/CLASSIC/POP/JAZZ (19) (16 on the remote
control)
(Preset equalizer function). Various sound modes are available
(CLASSIC, ROCK, POP, JAZZ, FLAT).
INTRO/ST/FM/ST (18) (15/11 on the remote control)
In FM radio mode:
To change between STEREO and MONO.
With an audio CD or a CD in MP3 format playing:
Press the INTRO/ST button (INTRO appears in the display).
Each track on the CD is played for 10 seconds. Press this button
again to stop searching. The currently selected track is played.
REPEAT/M+ (15/5)
In radio mode:
For selecting the stored radio stations.
With an audio CD running
Press once: (the emits a fi xed light). The current track
is repeated continuously.
Press twice: (the ALL emits a fi xed light). The whole
CD is played continuously.
Press three times: all functions are cancelled. The normal play
mode is resumed.
Only for CDs in MP3 format
Press once: the current track is repeated continuously
( appears in the display).
Press twice: the whole CD is played continuously (
ALL appears in the display).
Press three times: the selected folder of the MP3 CD is repea-
ted continuously ( FOLDER appears in
the display).
Press four times: the function is deactivated and the CD is
played in the normal mode.
18.06.2007, 11:56:59 Uhr