Good Energies B-CURE LASER PRO Mode D'emploi page 4

4. Safety precautions
• Never aim the laser beam at the eyes.
• It is always recommended to consult your doctor.
• If you are pregnant do not use the device to treat the stomach.
• Do not treat an area with a malignant tumor.
5. Contraindications
None
6. Operating instructions
6.1 Switch the device ON
Press the main power switch (No. 1). After a short beep the display will switch on and a timer will be displayed (No. 3).
6.2 Set treatment time
Press the treatment time setting button (No. 2): on its right side to increase time (+) or its left side to decrease time (-).
The timer is adjustable in increments of 30 seconds.
6.3 Activate the laser beam and begin treatment
Step 1: press the "treatment start push-button" (no. 4 in the component legend illustration) with one hand, and
make sure the green light at the front of the device is on. Step 2: continue pressing this button and simultaneously
press, using an additional finger on the pressure switch area (no. 1 in the illustration). Step 3: release both buttons at
the same time. Now the laser beam is active and treatment can begin. Place the device gently in full contact with the
skin. Do not treat on top of clothes or bandaging. To stop the functioning of the device, briefly press the "treatment
start push-button" (no. 4 in the illustration).
4