English; Instructions For Use - Good Energies B-CURE LASER PRO Mode D'emploi

ENGLISH

Content:
1. Component legend
2. Battery charging
3. Battery warnings
4. Safety precautions
5. Contra indications
6. Operating instructions
1. Component legend
5. Laser beam aperture
4. Treatment start push-button
3. LCD display, Timer
2. Treatment time setting button
1. Main power switch
2. Battery charging
Inside the battery compartment there are 3 (type AAA) batteries
partly charged. Complete the charging by plugging the charger
into an electrical outlet and connect the charger to the socket.
Battery charge time is approximately 7 hours, or until the word "FULL" appears on the screen. We recommend you
charge the device overnight once every three days, or when the display blinks/the device stops functioning.
3. Battery warnings
•
The AC/DC charger that comes with the device is the only charger allowed for use.
•
Do not take apart the batteries, heat them over 100°C or burn them.
•
Discard the batteries at an appropriate recycling center.
•
Do not turn the device on while it is being charged.
•
Do not, under any circumstances, charge ordinary, non-rechargeable batteries; it might cause a fire.
7.
8.
9.
10.
11.
6. Battery compartment cover
7. Charger socket
Treatment protocol
Control panel and troubleshooting
Technical specifications
Device maintenance
Warranty
Package content:
• B-Cure Laser device
• B-Cure case

• Instructions For Use

• Batteries
• Charger
• Adaptors
Upon opening the package, please
verify that it contains all the above
mentioned equipment. Please
make sure the device is unharmed.
If anything is missing or damaged,
please contact the distributor
immediately after purchasing.
3