Good Energies B-CURE LASER PRO Mode D'emploi page 10

9. Technical specifications - continued
Property
Dimensions
Charger output voltage
Weight
Operating conditions
Storage conditions
10. Device maintenance
1. Clean the laser beam aperture (No. 5), using a 70% alcohol solution . Clean between sessions if needed and before
handing it to another person's usage.
2. While cleaning, be sure to prevent wetting the lens.
3. Keep the device in proper storage and work conditions as specified in the technical specification table, do not
leave the device in the car in hot weather.
11. Warranty
The warranty is for 12 months according to company policy, as is detailed on warranty certificate. If batteries and/
or a charger are supplied with the device, they are not included in the warranty. The manufacturer/ distributor is
responsible for performance, safety and reliability of the equipment only on condition that all repairs are carried out
exclusively by Company - authorized personnel.
Consult accompanying documents
Electrical and electronic equipment
Type BF
Recycling
3 x 1.2V AAA Rechargeable batteries | 9V, 300 mA (For charging via AC/ DC adaptor)
10
Units Description, value
mm 200 x 70 x 40
9
VDC
grams 175
temp. 0 to 40
°
C°, %
humidity 15% to 90%
temp. -20 to 55
°
C°, %
humidity 10% to 95%
Temperature limitation
CE marking of conformity
IP22 – International Protection
Authorized representative in the European community
Notes
,
°
without condensation
,
°
without condensation
Humidity limitation
Caution, consult
accompanying documents
Manufacturer