Settings - Heru ES 11108 Mode D'emploi

Operating Instructions

Settings

It is possible to set the following functions:
• Automatic start of coffee brew cycle
• Duration of keep-warm function
• Clock
Selecting the Functions
Press PROG button (B) repeatedly to cycle through the functions to be set: Automatic start of coffee brew
cycle → Duration of keep-warm function → Clock → Exit setting→ ... (Selection starts from the beginning)
• Setting the Automatic Start of the Coffee Brew Cycle
1. Press PROG (B) to select this function.
2. The hours of the clock and AUTO start flashing on the display (15).
3. Use the arrow buttons ∧/∨ (C/D) to adjust the hours. (As the clock has a 12-hours display, AM or PM is
shown alternately to indicate the time of the day.)
4. Press PROG (B) once more. Now the minutes are flashing.
5. Adjust the minutes with the ∧/∨ buttons (C/D).
6. Press PROG (B) again. Programming of the time at which the brew cycle is to start automatically is com-
plete now.
ATTENTION! For filling in water and coffee, and for information on how to activate the automatic
brew cycle, it is essential to follow the instructions under Brewing Coffee!
Now, the single-digit hour indicator of the keep-warm function is flashing on the display ...
• Setting the Duration of the Keep-Warm Function
1. Select the required number of hours (1-5 hours) using the ∧/∨ buttons (C/D).
ES 11108
GB
!
!
25