Technical Specifications - Eagletone Scan 250 Manuel De L'utilisateur

Masquer les pouces

page de 6

/ 6
Signets

Les langues disponibles

User's manual english

CHANNEL AND ADD NO.

DMX512 Channel

1 Gobo + Color

2 Pan

3 Tilt

4 Light control

MAINTENANCE

• Make sure the power is turned off before taking down,

moving or performing any servicing of the light.

• Keeping the light clean is very important. No dust or oil

should enter the light, nor should you touch the inside of

the machine. If this happens, the brightness of the light can

weaken, so keeping the light clean will help maintain the

adequate brightness of the light, as well as increasing the

lifetime of the machine.

• Use only top-quality clear liquid and professional cleaning

systems for critical optics to clean the Moving Head light.

Alcohol and other chemical liquids are totally prohibited.

The Gobo wheel must be cleaned with a soft brush,

whereas the inside of the machine has to be cleaned with

a vacuum cleaner; this should be performed at least once

a year. In addition, the color and Gobo wheel needs to be

cleaned at least once a month.

DMX512 Add No.

• 0~5

• 6~11

• 12~17

• 18~23

• 24~29

• 30~35

• 36~41

• 42~47

• 48~53

• 54~59

• 60~65

• Gobo 1 and Gobo 2 Change

• 66~71

• Gobo 2 and Gobo 3 Change

• 72~77

• Gobo 3 and Gobo 4 Change

• 78~83

• Gobo 4 and Gobo 5 Change

• 84~89

• Gobo 5 and Gobo 6 Change

• 90~95

• Gobo 6 and Gobo 7 Change

• 96~101

• Gobo 7 and Gobo 8 Change

• 102~171

• Gobo Wheel rotate fast to slow

• 172~251

• 252~255

• 0~255

• 0~7

• 8~79

• 80~199

• 200~239

• 240~255

• Reset wait for about 5 seconds

Description

• Lamp OFF

• Lamp ON

• Gobo 1

• Gobo 2

• Gobo 3

• Gobo 4

• Gobo 5

• Gobo 6

• Gobo 7

• Gobo 8

• Open flash slow to fast

• Open

• 0--150 degree

• 0--110 degree

• Lamp OFF

• Lamp ON

• Stand alone

• Sound Active