Publicité
Les langues disponibles
Les langues disponibles
User's Guide
EAGLETONE
MH710 4IN1
1. SAFETY INSTRUCTIONS
Please read the instructions care-
fully as they include important
information about the installation
operation and maintenance.
• Please keep this User Guide for future
reference. If you sell the fixture to
another user, be sure that they also
receive this instruction booklet.
• Unpack and check carefully that there
is no transportation damage before
using the fixture.
• Before operating, ensure that the
voltage and frequency of power
supply match the power requirements
of the fixture.
• Disconnect mains power before servi-
cing and maintenance.
• Use a safety chain when attaching this
fixture. Do not handle the fixture by its
head only, always hold it by its base.
• Maximum ambient temperature is
40°C. Do not use this fixture in places
where the temperature is higher than
this.
• In the event of a serious operating
problem, stop using the fixture imme-
diately. Never try to repair the fixture
by yourself. Repairs carried out by
unskilled people can lead to damage
or malfunction. Please contact the
nearest
authorized
technical
assistance center. Always use spare
parts of the same type.
1
Eagletone MH710 4IN1
• Do not connect the device to any
dimmer pack.
• Do not touch
any wire
during
operation as there might be a hazard
of electric shock.
• To prevent or reduce the risk of elec-
trical shock or fire, do not expose the
fixture to rain or moisture.
• Do not look directly into the LED light
beam while the fixture is on.
Warning
Wait at least five minutes after having
switched off the fixture before opening
it.
The housing, the lenses, or the
ultraviolet filter must be replaced if they
are visibly damaged.
Caution
There are no user serviceable parts
inside the fixture. Do not open the
housing or attempt any repairs yourself.
In the unlikely situation that your unit
may require service, please contact your
nearest dealer.
User's Guide
2. TECHNICAL SPECIFICATIONS
• 7x10W quad-color RGBW-in-one Ultra
bright LEDs
• LED Colors: Red Green Blue and White
• DMX Channels: 8/13 channels
• Control Modes: DMX, Master/Slave,
Stand-alone, Sound-activated
• Pan: 180°, 360°, 540°
• Tilt: 90°, 180°
• Power supply: AC220-240V 50/60Hz
• Power consumption: 68.1W (0.30A),
Max at 230V
• Fuse: 3A 250V
• Dimensions: 225 x 225 x 270 mm
• Weight: 2.7kg
2
Eagletone MH710 4IN1
3. INSTALLATION
The unit should be mounted via its
screw holes on the bracket. Always
ensure that the unit is firmly fixed to
avoid vibration and slipping while
operating. Always ensure that the
structure to which you are attaching the
unit is secure and is able to support a
load of 10 times the unit's weight. Also
always use a safety cable that can hold
12 times the unit's weight when
installing the fixture.
The equipment must be attached by
professionals, and in a place which is
out of people's reach and where no one
has to pass by or under it.
Publicité
