Internal Elements - Eagletone Scan 250 Manuel De L'utilisateur

User's manual english Manuel de l'utilisateur
www.eagletone.com
user's manual
Please read these instructions carefully before use.
INTRODUCTION
Congratulations on the purchase of this new EAGLETONE
250 SCAN unit. We are confident you will enjoy many trouble-
free hours with it. To assist you with the care and use of this
product, we have prepared this short guide.
WARNING
• Do not place metal objects or spill any liquid inside the
unit.
• Do not place the unit in a high-temperature environment
or room.
• Keep the beam away from flammable objects. Keep a
minimum distance of 5 m between the light and any
flammable object.
• Keep a minimum distance of 0.5 m between the light and
the closest surrounding objects.
• Do not look directly at or into the beam. This will hurt your
eyes.
• The hanging bracket cannot be used to hold or hang any
other unit or object. Furthermore, do not set or attach any
object onto the rotating mirror as this would place undue
stress on the motors.
• Please make sure the power is turned off before opening
or servicing the light. Please allow 15 minutes for the lamp
to cool down before restarting the unit or performing any
other action as its temperature, when on, becomes very hot
and brutal changes in temperature could damage the lamp.
4

INTERNAL ELEMENTS

1. Lamp
2. Security Hook
3. Gobo Wheel Motor
4. Gobo Wheel
5. Transformer
6. Lens
7. Scanning Mirror
8. Scanning Motor
9. Hanging bracket
eagletone.com eagletone.com
EAGLETONE FLOWER LED EAGLETONE 250 SCAN
1