Technical Specifications - Eagletone LED Par 28 Live Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

User's guide
Eagletone LED PAR 28 LIVE
TABLE OF CONTENTS
1. Safety instructions

2. Technical specifications

3. Installation
4. How to set up the unit
5. How to control the unit
6. DMX 512 configuration
7. DMX 512 connections
8. Troubleshooting
9. Fixture cleaning
1. SAFETY INSTRUCTIONS
Please read the instructions care-
fully as they include important
information about the installation
operation and maintenance.
• Please keep this User Manual for
future reference. If you sell the fixture
to another user, be sure that they also
receive this instruction booklet.
• Unpack and check carefully that there
is no transportation damage before
using the fixture.
• Before operating, ensure that the
voltage and frequency of power supply
match the power requirements of the
fixture.
• It is important to ground the yellow/
green conductor to earth in order to
avoid electric shock.
• Disconnect mains power before servi-
cing and maintenance.
• Use a safety chain when attaching this
fixture. Do not handle the fixture by its
head only, always hold it by its base.
• Maximum ambient temperature is 40°C.
Do not use this fixture in places where
the temperature is higher than this.
• In the event of a serious operating
problem, stop using the fixture imme-
diately. Never try to repair the fixture
by yourself. Repairs carried out by
2
unskilled people can lead to damage or
malfunction. Please contact the nearest
authorized technical assistance center.
Always use spare parts of the same
type.
• Do not connect the device to any
dimmer pack.
• Do not touch any wire during operation
as there might be a hazard of electric
shock.
• To prevent or reduce the risk of elec-
trical shock or fire, do not expose the
fixture to rain or moisture.
• The housing must be replaced if it is
visibly damaged.
• Do not look directly into the LED light
beam while the fixture is on.
Caution
There are no user serviceable parts
inside the fixture. Do not open the
housing or attempt any repairs yourself.
In the unlikely situation that your unit
may require service, please contact your
nearest dealer.
2. TECHNICAL SPECIFICATIONS
• Each lamp features 28 × 3W tri color
(RGB) 3-in-1 LEDs
• 4 operational modes: 2/3/4/6/7/14ch
DMX, Auto, Sound-activated, Master/
Slave
• Easy browsing through the menus with
the 4-Button menu system and the
LED Display
• Blackout, static, dimmer, strobe,
individual control of red, green, blue
LEDs
• Program continues automatically
during periods without music or bass-
beat
• Sound-controlled via built-in
microphone
• DMX control via any standard
DMX-controller
• Stand height up to 240cm
• 4-pedal foot controller included
• Extremely long life, low power
consumption
• Packing Size (L×W×H):
1300×390×190mm
• Stand: 1600×160×160mm
• Weight: 16.75kg
User's guide
Eagletone LED PAR 28 LIVE
3. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you
are attachin the unit is secure and is able
to support a load of 10 times the unit's
weight. Also always use a safety cable
that can hold 12 times the unit's weight
when installing the fixture.
The equipment must be attached by
professionals, and in a place which is out
of people's reach and where no one has to
pass by or under it.
3

Publicité

Table des Matières
loading

Table des Matières