Eagletone LED Par 28 Live Guide De L'utilisateur page 10

User's guide
Eagletone LED PAR 28 LIVE
2. P ress the UP or DOWN button until the setting you want to use is displayed, and then
press ENTER to confirm and exit.
Sound Mode
In this mode, you can choose the sound-activated show that you want to use.
1. Press the MENU button, then press the UP button until
press ENTER. One of the Sound-activated mode programs, from
will be displayed.
2. P ress the UP or DOWN button to scroll through the sound-activated shows and
select the show you want to use.
3. Press the ENTER button to confirm and exit.
Auto Mode
In this mode, you can choose the stand-alone shows. You can choose between 25
preset shows.
1. Press the MENU button, then press the UP button until
press ENTER. One of the Stand-alone mode programs, from
be displayed.
2. P ress the UP or DOWN button to scroll through the stand-alone shows and select
the show you want to use.
3. Press the ENTER button to confirm and exit.
Speed of Auto Mode
In this mode, you can adjust the stand-alone shows' speed and the sensitivity of the
sound activation.
1. Press the MENU button, then press the UP button until
press ENTER. One of the sound activation speed and sensitivity values for the Stand-
alone mode, from to
2. P ress the UP or DOWN button to scroll through the stand-alone shows and sound
activations and select the speed you want to use.
3. Press the ENTER button to confirm and exit.
Blackout or Standby mode
1. Press the MENU button, and then press the UP button until
then press ENTER. Either
2. T o activate Blackout, press the UP or DOWN button until
then press ENTER to confirm and exit. The fixture will now be in Blackout mode. To
deactivate the Blackout mode, select
Display Mode
This function will reverse the display by 180º.
1. Press the MENU button, then press the UP button until
press ENTER.
2. The display will show or
3. Press the UP button to select
6
is displayed, and then
is displayed, and then
is displayed, and then
, will be displayed.
is displayed, and
or will be displayed.
is displayed, and
and press Enter.
is displayed, and then
to activate this function, or
this function.
4. Press ENTER to confirm.
Manual mode RED Dimmer
Press the MENU button, then press the UP button until
press ENTER. The display will blink. Use the UP and DOWN buttons to select a value
to ,
between
Manual mode GREEN Dimmer
Press the MENU button, then press the UP button until
press ENTER. The display will blink. Use the UP and DOWN buttons to select a value
between
Manual mode BLUE Dimmer
Press the MENU button, then press the UP button until
press ENTER. The display will blink. Use the UP and DOWN buttons to select a value
between
to , will
5. HOW TO CONTROL THE FIXTURE
There are two ways to control the fixture:
A. Via a Universal DMX controller
B. By Master/Slave operation
A. Universal DMX controller
The fixture can be remotely controlled by a universal DMX controller, once its DMX
address has been set. First, you need to program two scenes into a chase, and then link
the fixtures to the universal DMX controller. When you run the chase, all the fixtures
in the chain will have their DMX address set automatically. The fixture uses four chan-
nels. Please refer to the following diagram to set the address for the first four units.
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together to operate without a controller. In
Master/Slave mode, the first fixture will control the others to give an automatic, sound-
activated, synchronized light show. This function is ideal when you want to provide an
instant show. Do not connect any cable to the first fixture's DMX input XLR connector,
and the other fixtures will be set to slave mode automatically. Link the other fixtures by
connecting the DMX output connector to the next fixture's DMX output XLR connector
(daisy chain), and so on, until all the fixtures are linked. Any fixture can act as a Master
or as a Slave.
to deactivate
and .
and .
and .
User's guide
Eagletone LED PAR 28 LIVE
is displayed, and then
is displayed, and then
is displayed, and then
7