AEG CDP 4226 Mode D'emploi page 43

Masquer les pouces Voir aussi pour CDP 4226:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Overview of the Components
1 PHONE headphone jack
2 VOLUME control
3
button to open the CD-compartment
4
button (next music file / forward search)
5
button (previous music file / reverse search)
6
button (stop)
7
button (play/pause)
8 Display
Underside (not shown)
Battery compartment
Start-up of the device/introduction
• Select a suitable location for the device, such as a dry, flat, non-slip surface on which it
is easy to operate the machine.
• Remove the protective film from the display if it is still present.
Transport Safety Device, CD Compartment
• Open the CD-compartment by pressing the button (3).
• Before operating the machine for the first time, remove the transport safety device
from the CD player if it is still in place.
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment on the bottom.
• Insert 2 batteries of type AA/R6 1.5 V. Please ensure that the polarity is correct (see the
floor of the battery compartment)!
• Then close the battery lid.
NOTE:
A battery icon on the display will indicate that the battery needs to be replaced.
CAUTION:
• If the device is not used for a long period of time, remove the batteries to avoid the
spilling of battery acid.
English
43

Publicité

Table des Matières
loading

Table des Matières