Atlantic NEFERTITI Notice D'utilisation Et D'installation page 16

4) How to install the device
The installation template is printed on the packaging.
1/ Unfasten the carton's flaps and place it
against the wall with the lower flap folded
back and resting flat on the floor. Prick out
the four drill holes though the packaging
(without drilling) and then remove the
packaging.
2/ Carefully mark the drilling points with
a pencil (draw a cross, 4cm wide).
3/ Drill the four holes.
4/ Position the four hooks and screw
them tight.
5/ Attach the device and lock it in place.
Note: The pins supplied with the device
are of the standard type. In case of a
particular stand, use appropriate pins.
Model
width
450 mm
Measurement (A) for
Power
fitting lugs
300W 814 mm
500 W 1114 mm
750 W
1000 W
2
4
Model
width
550 mm
814 mm
1114 mm
1414 mm
Model width 450 mm : 347,5 mm
Model width 550 mm : 447,5 mm
418 mm
SOL
3
5
15
41
60
GB
A