WIKA PG43SA-D Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Safety
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
Refrain from unauthorised modifications to the
instrument.
Any use beyond or different to the intended use is considered as
improper use.
3.4 Compliance with the conformity in accordance with 3-A
For a 3-A compliant connection the following sealings have to be
used:
For milk thread fittings per DIN 11851, suitable profile sealings
have to be used (e.g. SKS Komponenten BV or Kieselmann
GmbH).
For fittings per IDF sealings with support ring per ISO 2853 have
to be used.
Note: Connections per SMS, APV RJT and NEUMO Connect S are
not 3-A compliant.
3.5 Compliance with EHEDG conformity
For an EHEDG conform connection, sealings in accordance with the
current EHEDG policydocument must be used.
Sealings for connections per ISO 2852, DIN 32676 and BS 4825
part 3 are, e.g., manufactured by Combifit International B.V.
A manufacturer of sealings for connections per DIN 11851 is, e.g.,
Kieselmann GmbH. A manufacturer of VARIVENT
GEA Tuchenhagen GmbH. A manufacturer of NEUMO BioConnect
sealings is, e.g., Neumo GmbH & Co. KG.
WIKA operating instructions disphragm pressure gauge, model PG43SA-D
sealings is, e.g.,
®
EN
®
9

Publicité

Table des Matières
loading

Table des Matières