Texi TUTU MC 9900 Mode D'emploi page 137

TEXI Tutu operation manual
INSERT ZIPPERS AND PIPING ZIPPERS
Attach the zipper foot which can be snapped on to the right or the or left of the
foot sew you can stitch close to the zipper on the right or left side.
Illustration
1: Needle to the left of foot
PIPING
To insert piping, purchase pre-made piping or cover cording with a bias strip
of fabric using the zipper foot snapped on to the left side of the ankle. Place
the piping between two layers of fabric. Stitch with the piping next to the foot so
the stitching is tight against the cord.
SCALLOP STITCH
Left side
CONTINUOUS DECORATIVE PATTERN
Use the satin foot for continuous decorative stitch patterns. This foot has
a full indentation on the underside to permit easy over closely spaced
zigzag stitches, and even feed of the fabric.
2: Needle to the right of foot
This stitch is used to sew edge on women and children`s wear
and table cloths.
1. Fold the fabric right sides together in and sew along the edge.
2. Cut the fabric along the seam leaving an allowance of 3mm
(1/8") for seaming. Notch the allowance.
3. Turn fabric over and push out the curved seam to the surface
and press it.
135