Texi TUTU MC 9900 Mode D'emploi page 132

TEXI Tutu operation manual
FABRIC, THREAD AND NEEDLE TABLE
Select size of thread and needle in accordance with fabric to be sewn.
Type of fabric
Light Weight - thin georgette, organdy, viole,
taffeta, silk, etc.
Medium Weight - gingham, pique, linen, cotton,
satin, thin corduroy, velvet, etc.
Heavy weight - gabardine, tweed, denim, etc.
Stretch - double knit, tricot, spandex, jersey, etc.
STRAIGHT STITCH SEWING
Straight stitch patterns should be selected suit the type of fabric
being sewn.
1. Position the fabrics under the presser foot and lower it.
Hold the upper thread and bobbin thread loosely.
2. Press start to start sewing. (When foot controller is used, press
the pedal). Place hand lightly on the fabric while sewing to guide
the fabric.
3. When you reach the end of seam, stop sewing by pressing
the start/stop (or releasing the pressure on controller).
4. Raise the presser foot and cut thread.
Striaght stitch with auto-lock stitch
1. Position the fabric under the presser foot and lower it.
Hold the upper thread and bobbin thread loosely.
2. Start sewing.
Backward and continue sewing forward
1. When you reach the end of seam, press the reverse. Machine
will sew a few stitches backward and sew a few stitches forward
and stop automatically.
2. Raise te presser foot and cut thread.
Thread size
Ctn. #120 - 150
Silk #120 - 150
Syn. #120 - 150
Ctn. #100 - 120
Silk #100 – 120
Syn. #100 - 120
Ctn. #50 - 80
Silk #50 - 80
Syn. #50 - 80
Ctn. #120 - 150
Silk #120 - 150
130
Needle size
70 – 80
80 – 90
90 – 100
80 – 90