Seat Location Selection And Adjustment; Adjustment Of The Vehicle Seat; Seat Location For Universal Installation - KIDDY guardianfix3 Guide D'utilisation

The back rest (C) of the Guardianfix 3 pivots automatically to the lie-flat position.
The lie-flat position is reached when the head support (G) of the child seat is
against the back rest of the vehicle seat (Fig. 9).
The maximum lie-flat position is reached when the seat (I) can-
!
not be pulled any further forward.
The maximum angle of the lie-flat position depends on the position of the Isofix
anchorage points in the vehicle.

5 Seat location selection and adjustment

5.1 Adjustment of the vehicle seat

Read all the necessary information about the use of child
restraint systems (A) in your vehicle owner's manual.
If installation is impeded by a head support, it must be used in the top-most
position or removed (Fig. 10).
With the moving back rest (C) of the Guardianfix 3, it can be assured that it rests
against vehicle seat back rest. Position the adjustable back rest of the vehicle
seat appropriately.

5.2 Seat location for universal installation

The Guardianfix 3 child restraint system (A) can be installed on any seat of vehicles
equipped with a 3-point vehicle seat belt system (Fig. 11).
The Guardianfix 3 can also be used on rear-facing vehicle seats which are
equipped with a 3-point vehicle seat belt system (Fig. 11).
* If the vehicle manufacturer permits child restraint systems on the front pas-
senger seat, the seat should be moved to the rear-most position.
25
EN