AVG MI304B Guide De L'utilisateur page 48

INSTRUCTIONS FOR USE
Turn off
a. Press the "
"beep" sound once and it will turn off.
b. Turn off the entire unit by pressing the "
make a "beep" sound once and the indicator light will turn off. The
Unit is now on standby mode.
Note: Please do not pull the power plug until the cooling fan has stopped.
Timer
Setting the Timer to Automatic switch-off:
With the desired heating zone Powered ON, press the "
display will blink and show a "00".
decrease to the desired time until the desired time appears in the display
(choose up to 99 minutes). Once the timer is set, if keys haven't been
pressed after 5 seconds, it will begin to countdown, the timer display will
remain lit, the indicator for that particular burner will flash. When the time
is completed, a "beeping" sound will go off indicating that the time is up and
selected heating zone shut off automatically.
If you want to set another burner to switch-off automatically, press "
key to until the desired timer indicator blink, repeat the same steps.
If you want to check the remaining time for another zone, press the "
until the indicator for the desired burner blinks.
If more than one switch-off time is programmed, the shortest time remaining
will show in the display, the indicator for that particular burner will flash.
Cancelling the timer:
Press the " " until the indicator for the desired burner blinks, then press
the "+" or "-" to set the timer to "00". The timer display will blink for 5 seconds
and then turn off, indicating that the timer of selected heating zone has
been cancelled.
" key of the cooking zone being used. It will make a
Press the "+" or "-" to increase or
"key, which will also
" key. The timer
"
"
46