AVG MI304B Guide De L'utilisateur page 42

IMPORTANT INSTALLATION INSTRUCTIONS
BEFORE INSTALLING THE COOKTOP
1. Visually inspect the cooktop for damage.
Also make sure all cooktop screws are on tight.
2. Place the cooktop into the countertop cut out.
Model and Serial Number Location:
The serial plate is located under the cooktop.
When ordering parts or making inquiries about
your cooktop, be sure to include the model and
serial numbers.
Connecting to a 3 wires power supply cable
electrical system.
1. Disconnect the power supply.
2. In the circuit breaker, fuse box or junction box
connect appliance and power supply cable wires
as shown below.
3. MI304B: Circuit breaker fuse rating must be
above 40A and wire should be 2/8 or 3/8 copper.
MI365B: Circuit breaker fuse rating must be
above 50A and wire should be 2/6 or 3/6 copper.
4. Acceptable size of conductors should be no less
than 10AWG, copper only and no less than
than167°F.
5. A wire-binding screw or stud used in the wire
terminal should be 10 or larger.
WARNING
1. The electrical power to the cooktop must be
shut off while line connections are being made.
Failure to do so could result in serious injury or
death.
2. An extension cord must not be used with this
appliance. Such use may result in a fire,
electrical shock or other personal injury.
:
White Wire
Green Wire
( Grounding )
Cable from appliance
Cable from Power Supply
Black Wire
Junction Box
40