Replacement Parts And Wearing Parts - Beurer LE 60 Mode D'emploi

Problem
The device automatically
stops when dehumidifying.
The device is working but
is not reducing the relative
air humidity enough.

10. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Designation
Plastic cover + filter
Water tank
Condensate hose
11. Technical specifications LE 60
Model
Mains voltage / power
Protection class
IP protection class
Power
Dimensions (L x W x H)
Weight when empty
Recommended room size
Maximum tank capacity
Dehumidifying capacity
Nominal air flow
Cooling agent / quantity
Permissible operating temperature
Cause
The water tank is full.
The water tank was not put back
in correctly.
The air filter is blocked.
The ambient temperature is below
0°C.
The ambient temperature is above
40°C.
The room is too big.
The air filter is blocked.
The air intake/air outlet is blocked. Ensure that the air intake/outlet is not
There too much exchange of air in
the room.
LE 60
See type plate on the device
I /
IPX0
300 watts (30°C room temperature / 80% relative humidity)
355 watts (35°C room temperature / 90% relative humidity)
346 x 242 x 590 mm
approx. 13.2 kg
40 m²– 60 m²
approx. 4.0 litres
approx. 20 litres/24 h (30°C room temperature / 80% relative humidity)
approx. 12 litres/24 h (27°C room temperature / 60% relative humidity)
I: 140 m³/h, II: 160 m³/h, ∞: 200 m³/h
R 134a, 170 g
5°C – 35°C
Solution
Empty the water tank, then start up the
device again.
Put the water tank in the correct posi-
tion.
Clean the air filter.
The ambient temperature must be
above 0°C.
The ambient temperature must be
below 40°C.
The device is only suitable for a room
size of up to 60 m².
Clean the air filter.
blocked.
Close the windows and doors.
Item number and/or order number
163.834
163.832
163.647
22