Storage; What If There Are Problems; Replacement Parts And Wearing Parts; Technical Specifications Le 40 - Beurer LE 40 Mode D'emploi

8. Storage

If you do not plan to use the device for 2 to 3 days, we recommend that you unplug it and store it thoroughly
empty, clean and dry in the original packing in a dry environment. Ensure that no objects are placed on top
of the device.

9. What if there are problems?

Problem
No display.
No display.
The device automatically
stops when dehumidifying.

10. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Designation
Rear cover
Filter
Water tank
Condensate hose

11. Technical specifications LE 40

Model
Mains voltage / Power
Protection class
IP protection class
Dimensions (L x W x H)
Weight when empty
Recommended room size
Maximum tank capacity
Dehumidifying capacity
Nominal air flow
Cooling agent / quantity
Operating temperature
Cause
The device is not connected to
mains power supply.
The device has switched itself off
due to safety reasons.
The water tank is full.
The ambient temperature is below
0°C.
The ambient temperature is above
40°C.
LE 40
See type plate on the device
I /
IPX0
289 mm x 201 mm x 469 mm
approx. 9.7 kg
20-30m²
approx. 1.9 litres
approx. 12 litres/24 h (30°C room temperature / 80% relative humidity)
approx. 6 litres/24 h (27°C room temperature / 60% relative humidity)
100m³/h
R 134a, 120 g
5°C – 35°C
Solution
Connect the mains plug and switch on
the device.
Clean and refill the device before next
use. Then switch it on again.
Empty the water tank, then start up the
device again.
The ambient temperature must be
above 0°C.
The ambient temperature must be
below 40°C.
Item number and/or order number
163.632
163.633
163.634
163.647
22