Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT SPECIFICATIONS
Switch ............................................................. Single Speed
No Load Speed .....................................29,000 /min. (RPM)
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
APPLICATIONS
You may use this tool for the following purposes:
Smooth, professional trimming of laminates and wood
veneer
FEATURES
Collet Size ................................................................. 1/4 in.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
OPERATION
STARTING/STOPPING THE TRIMMER
See Figure 1, page 10.
To turn the trimmer ON (I), slide the switch on front of the
trimmer to the ON (I) position.
Return the switch to the OFF (O) position when finished.
INSTALLING/REMOVING BATTERY PACK
See Figure 2, page 10.
Set the switch in the OFF position.
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
WARNING:
Battery tools are always in operating condition. Turn the
switch OFF when not in use or carrying at your side,
when installing or removing the battery pack, and when
installing or removing bits.
5 — English
Publicité
Table des Matières
