LG U8500 Guide De L'utilisateur page 236

Settings
1. Additional Setup
- Select "Settings" menu' from "Internet " menu",
Select next menu "Accounts". Open "Options"
menu by pressing Left Soft Key and select "Add"
option.
The following items need to be configured
Account title
Homepage
Connection mode
Proxy IP address
Proxy port
Security
Timeout
Access point
- Press "Done" key to save any configuration
changes.
110
Settings account name.
Service URL.
Choose from given list of connection modes.
(default is UDP (CO))
WAP Gateway IP address provided by the
operator. (e.g. 193.254.160.002)
Port details are provided by operator,
depending upon "Connection mode".
Choose "Secure" connection if needed,
Default value is "Non-secure".
Linger time setting. (150 seconds as a
default)
Access point setting for the corresponding
service. (More details for adding or editing
new Access point refer step 3)
3. Access Points
- User can list the available Access Points by selecting
"List" appears on Centre soft menu of "Access
point" parameter from Internet setting value.
- User can add a new Access Point by selecting
"Add New" from "Option" menu.
- Press "Done" key to save any configuration
changes. The details for Access Point
parameters are as follows:
Connection title Access Point profile name.
Bearer Choose the bearer from the list. (Default is
"UMTS/GPRS")
Authentication Choose the authentication from the list.
(Default is "No auth")
User name Information provided by Service Provider.
Password Information provided by Service Provider.
APN APN name to access network. Information
provided by service provider.
Traffic class Choose the Traffic Class from the list.
(Default is "Subscribed")
Req. max UL bitrate Choose the Maximum Uplink Bitrate from
the list. (Default is "Subscribed")