LG U8500 Guide De L'utilisateur page 183

1 1. Move the cursor to the Outgoing server port field
and configure the mail server port number. In
general, the outgoing mail server port number
(SMTP) is 25.
12. Move the cursor to the Incoming mail server field
and configure the incoming e-mail server.
13. Move the cursor to the Incoming server port field
and configure the mail server port number. In
general, the incoming mail server port number
(POP3) is 1 10.
14. Move the cursor the Email inbox type and select
the email inbox type. You can select one between
POP3 and IMAP4.
15. Move the cursor to the Access point field to
select an access point to connect to the Internet.
You can select a configured access point using
the List key.
16. Move the cursor to the auto retrieve item and
decide a auto receiving E-mail message as a fixed
time slot, You can select on/off using the List key.
If you want to utilize this function, there is
selected auto retrieve in E-mail setting. But auto
retrieve is not selected, you can select auto
retrieve in Option.
17. Move the cursor to the SMTP authentication field
and decide whether the outgoing mail server
requires authentication. You can select On or Off
using the List key.
18. Press the Option key and select [Advanced
setting]. You can change APOP setting. And you
can also change username and password for
SMTP authentication.
Editing an e-mail account
1. Select a desired e-mail account from the e-mail
account list and press the Edit key.
2. You can edit desired fields by moving the cursor
up and down.
3. When configuration is complete, press the Done
key to complete the e-mail account configuration.
Voice mail
(Menu 4.9.5)
You can insert or modify voice mail centre.
Push message
(Menu 4.9.6)
You can configure method for downloading push
57