LG U8500 Guide De L'utilisateur page 228

Settings
You can edit the following configuration items by
selecting the right soft key.
Connection title
Bearer
Authentication
User name
Password
APN
Traffic class
Req. max UL bitrate
Reliability class
DNS server
Req. max DL bitrate
Dial-up number
102
Access Point profile name.
Choose the bearer from the list. (Default is
"UMTS/GPRS")
Choose the authentication from the list.
(Default is "No auth")
Information provided by service provider.
Information provided by service provider.
APN name to access network. Information
provided by service provider.
Traffic Class Choose the Traffic Class from
the list. (Default is "Subscribed")
Choose the Maximum Uplink Bitrate from
the list. (Default is "Subscribed")
Choose the Reliability class from the list.
(Default is "Subscribed")
Choose the DNS server from the list.
(Default is "Automatic")
Choose the Maximum Downlink Bitrate from
the list. (Default is "Subscribed")
Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Information
provided by service provider.
Baud rate Required in case of Bearer is "UMTS/GPRS/CSD"
or "CSD" Choose the value from select list.
(Default is "9600")
Call type
Required in case of Bearer is "UMTS/GPRS/CSD"
or "CSD" Choose Call type from the list. (Default
is "ISDN")
Required in case of Bearer is "UMTS/GPRS/CSD"
CSD username
or "CSD" Information provided by Service Provider.
Required in case of Bearer is "UMTS/GPRS/CSD"
CSD password
or "CSD" Information provided by Service Provider.
]
Press "Done" key to save any configuration
changes.
Sync Service
(Menu 9.6.4)
If Sync service is supported by your network
operator, that service function synchronizes the
data in a phone and the data on a server such as
contact address information and schedule items via
a wireless network.
Connect
• Menu > Settings > Connectivity > Sync service
1. Select the Connect item and then press the
Select key.