Installation; Preparing To Install The Appliance - Atlantic SFLC DIG2 Mode D'emploi

PREPARING TO INSTALL THE APPLIANCE

Installation rules
-
This appliance has been designed to be installed in residential premises.
Please contact your distributor for all other cases.
-
The appliance must be installed in accordance with the the regulations
and current regulatory practices in the country where the appliance is
installed (NFC 15-100 for France).
-
The appliance must be powered with 230 V Single phase 50Hz.
-
In damp rooms such as bathrooms and kitchens, you must install the
connection unit at least 25 cm from the floor.
Keep the appliance away from any air currents that may
interfere with its operation (e.g.: under Controlled Mechanical
Ventilation, etc.).
Do not install it under a fixed plug.
≥250
mm

Installation

Respect
from furniture when positioning the
≥150 mm
appliance.
Do not install any shelves above the
appliance. Keep a clearance of 50 cm
in front of the unit.
The unit must be at least 5 mm away
from the wall.
To avoid any danger for very young
children, we recommend installing
this appliance so that the lowest
≥250 mm
19. 0 °
heating bar is at least 600 mm above
≥200 mm
the ground.
Volume 1 No electrical appliance
IPX4 electrical appliance
(Standard EN 60335-2-
Volume 2
43: 2003/A2: 2008)
the
22
minimum distances