SDMO ST 2.36H Manuel D'utilisation Et D'entretien page 15

1. Preface
2. General description
3. Preparation before starting
4. Using the generator set
5. Safety features (if fitted, see specifications table)
6. Maintenance schedule
1. Preface
1.1. Recommendations
Thank you for buying one of our pump units. We recommend that you read this manual carefully and follow the safety and
maintenance advice and user instructions for your pump unit very closely.
The information contained in this manual is taken from technical data available at the time of print. In line with our policy of
continually improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Earth
2 - Warning, emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
A = Pump unit model
B = Max fuel flow at zero
elevation
C = Suction and discharge
diameters
1.3. Instructions and safety regulations
Do not start the pump unit without first removing the protective cover and closing all of the openings.
Never remove the protective covers or open the access flaps if the pump unit is running.
Danger
Warning: risk of electric shock
Danger, risk of burns
1
1 - Important: refer to the documentation accompanying the pump unit
3 - Stop the engine before filling with fuel
B
C
Example of an identification plate
Contents
7. Maintenance procedures
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Conditions of warranty
12. EC Declaration of conformity
2 3
Warning: oil is not supplied with
the pump unit. Always check the
oil level before starting the pump
unit.
D = Maximum elevation height
A E = Weight of pump unit
K = Serial number
D
E
F