LG G Pad IV 8.0 FHD Mode D'emploi page 25

Charge the battery before using it for first time. Use the charger included
with your device to charge the battery. A computer can also be used to
charge the battery by connecting the device to it using the USB cable.
Use only LG-approved chargers and cables. The use of unapproved
chargers or cables may cause a battery charging delay or display a pop-
up message regarding slow charging. It can also cause the battery to
explode or damage the device, which is not covered by the warranty.
Your device has an internal rechargeable battery. For your safety, do not
remove the embedded battery.
The battery must be fully charged initially to improve battery lifetime.
Remove the charger from the power socket after the device is fully
charged. This prevents unnecessary power consumption.
To perform a soft reset of your device
A soft reset may be used to reset the device if the screen freezes, or the
buttons, touch screen, or device are no longer responding.
Simply press & hold the Volume down and Power/Lock keys until the
device restarts.
Charging the Plus Pack
Plug the USB cable into the micro USB cable port (USB Type-B port) on
the Plus Pack. The LED indicator turns green when the battery is fully
charged.
Basic Functions
LED Indicator
24