LG G Pad IV 8.0 FHD Mode D'emploi page 21

USB Type-A Port (Output 2) (USB Peripheral Port)
Plug a USB Type-A cable into the port to connect OTG devices (such as a keyboard) or
charge other devices.
Connecting Terminals (Output 1)
Attach the tablet by lining up the terminals, making sure that magnets on the Plus
Pack are aligned properly with those of the tablet.
When you connect another device to charge using a USB cable without
the tablet attached, charging will start after about 4 seconds once the
device checks the output mode.
To perform a reset of the Plus Pack, simply press and hold the Power
button for about 8 seconds.
Be careful not to spill food or liquids on the charging terminals of both
the tablet and the Plus Pack. It can cause malfunctions.
Risk of fire and burns. Do NOT open, crush, heat above 60°C/140°F
or incinerate. Violation of the instructions may cause minor or serious
damage to the product.
Basic Functions
Stereo Speakers
20