Publicité
Instruction Leaflet IL040029EN
Effective December 2017
FR6 mounting instructions
Remove the carton from the drive.
Step 1:
Step 2:
Remove the four screws (used to fix the drive to
the pallet) with an M8 or 3/8-inch wrench.
Use a hook to lift the drive.
Step 3:
EATON
10
www.eaton.com
Attach the drive to the mounting plate with four
Step 4:
M8x20 or 3/8-inch screws and four M8 or 3/8-inch
nuts with an M8 or 2/8-inch wrench. The opening
dimensions on the mounting plate should follow
required dimensions (refer to the drive mounting
template printed on the outside carton).
PowerXL DH1 Series VFD
SCREW:4-M8*20
NUT:4-M8
Publicité
