Troubleshooting - Nilfisk VHW200 Manuel D'instructions

Problem
Reduced vacuum cleaner performance
Vacuum cleaner sudden stop
Dust leaks from the vacuum cleaner
Electrostatic current on the vacuum
cleaner
01/2015

Troubleshooting

Cause
Clogged primary filter
Clogged vacuum hose
Circuit breaker activation
The filter is torn
Non existent or inefficient grounding
13
VHW200 - VHW201 - VHW210 - VHW211
Remedy
Clean the filter. Replace it if this is not
sufficient.
Check the vacuum hose and clean it.
Check the circuit breaker adjustment.
Check the motor electrical input.
Empty the container.
Contact an authorised after-sales
service centre if necessary.
Replace it with another of identical
type.
Check all ground connections.
Especially check the connection at the
inlet.
GB
C411