Proper Use; Features And Equipment; Included Items; Technical Information - Parkside PBS 900 B1 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction
Belt sander PBS 900 B1
Introduction
Q
Congratulations on your purchase. You have select-
ed a high quality product. The instructions for use
are a part of this product. They contain important
information about safety, use and disposal. Before
using the product, please familiarise yourself with all
the operating and safety instructions. Use the product
only as described and for the specified applications.
When passing this product on to others please be
sure to also include all of its documentation.

Proper use

Q
The belt sander is designed for dry sanding of large
surfaces of wood, plastic, metal, plaster and painted
surfaces. The device may only be used for dry sand-
ing. Always use a sanding belt and grade of grit
suitable for the particular surface you are sanding.
The speed selected should also be appropriate for
the material. The device is not intended for commer-
cial use. Any other use or modification to the device
shall be considered as improper use and could give
rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from
improper use.

Features and equipment

Q
Belt speed adjuster wheel
1
Locking knob
2
ON / OFF switch
3
Toothed belt cover
4
Dust extraction spout
5
Belt adjuster screw
6
Auxiliary handle
7
Ventilation slots
8
Tensioning lever
9
Dust collection box
10
Extraction adapter
11
36 GB
Screw clamps 2 x
12
Reducer
13

Included items

Q
check that all the items and accessories
are present immediately after unpacking
the device:
1 Belt sander PBS 900 B1
1 Sanding belt
1 Dust collection box
1 Extraction adapter
(for external vacuum dust extraction)
2 Screw clamps
1 Reducer
1 Operating instructions

Technical information

Q
Belt sander:
Nominal voltage:
Nom. power input:
No-load belt speed:
No-load speed:
Sanding belt
Protection class:
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 92.22 dB(A)
Sound power level:
Uncertainty K:
Wear ear protection!
Total vibration, EN 60745:
Vibration emission value
Rear handle: a
= 4.181 m / s
h
Front handle: a
= 6.115 m / s
h
Uncertainty K = 1.5 m / s
Parkside PBS 900 B1
230 V∼, 50 Hz
900 W
240–400 m / min
n
450–750 U / min
0
75 x 533 mm
II /
103.22 dB(A)
3 dB
2
2
2

Publicité

Table des Matières
loading

Table des Matières