Epson TM-T88V-DT Manuel De L'utilisateur page 9

Handle the AC cable with care. Improper handling of the AC cable may cause
fire hazard or electric shock.
• Do not modify or attempt to repair the cable.
• Do not place any heavy object on top of the cable.
• Avoid excessive bending, twisting, and pulling of the cable.
• Do not place the cable near heating equipment.
• Check that the plug is clean before plugging it in.
• Be sure to push the prongs all the way in.
• Do not use a damaged cable.
Regularly remove the power plug from the outlet and clean the base of the
prongs and between the prongs. If you leave the power plug in the outlet for a
long time, dust may collect on the base of the prongs, causing a short and fire.
Do not attempt to open or disassemble the internal lithium battery. This could
result in burns or release of hazardous chemicals.
Do not charge or leave the internal lithium battery in a hot place such as near a
fire or on a heater because it could overheat and ignite.
Do not block the openings of this product. The product overheats and fire may
result.
• Do not place the product in an unventilated narrow location, such as
a bookshelf.
• Do not place the product on carpet or bedding.
• Do not cover the product with a blanket or tablecloth.
Do not connect a telephone line to the drawer-kick connector of the printer.
The telephone line or printer may become damaged.
CAUTIONS:
❏
Main body
If you turn off the TM-T88V-DT, wait more than 10 seconds before you turn it
on again. If the TM-T88V-DT is turned on without an interval, it may not start
up normally.
Do not connect the unit to power outlets that are close to devices that
generate voltage fluctuations or electrical noise. In particular, stay clear of
devices that use large electric motors. Otherwise, the TM-T88V-DT may
malfunction.
Do not use this product with any voltage other than the specified one.
Doing so may lead to fire.
Always connect the AC cable to the AC inlet of the AC adapter,T before
plugging it into the power outlet.
Be sure to push the plug of the AC cable all the way into the AC inlet of the
AC adapter,T.
Always unplug the AC cable from the power outlet before unplugging it
from the AC inlet of the AC adapter,T.
When disconnecting the AC cable, hold the plug firmly. Do not tug on the
cable itself.
Do not connect the cables in ways other than those specified in this
manual. Different connections may cause equipment damage or fire.
Make sure that the total power requirements of all devices receiving power
from this product do not exceed the power limitation. Otherwise, the
product may become damaged. See the Specifications of the TM-T88V-DT
Technical Reference Guide for detailed information on the power
capacity of the product.
Be sure to use this product with the connector cover attached. If it is not
attached, foreign objects may enter this product, causing fire or equipment
damage.
TM-T88V-DT User's Manual 3
English