FireWare Fusion 025-012-012 Mode D'emploi Utilisateurs page 29

User Manual
EN
FireWare Fusion
Connecting Devices
Connecting a Compatible Bluetooth Deviceto the Fusion
You can play media from a compatible Bluetooth device using the Bluetooth wireless connection. You can
control the music playback with the media app on a Bluetooth device or using the FUSION-Link smartphone
app. For information about the FUSION-Link app for compatible Apple or Android devices, go to the Apple
App Store® or the ™Google Playstore.
1. Enable Bluetooth on your compatible Bluetooth device.
2. Bring the compatible Bluetooth device within 10 m (33 ft.) ofthe Fusion.
3. On the stereo, press
The Fusion remains discoverable for two minutes.
.
4
On your compatible Bluetooth device, select Fusion from the list of discovered devices.
If your compatible Bluetooth device does not connect to the Fusion,
repeat the above steps.
5.
Play music using your Bluetooth device.
Immediately after the Fusion is turned on, it connects automatically to the last connected device when it is
within range and Bluetooth wireless technology is enabled. You can connect a previously paired Bluetooth
device by selecting FireWare Fusion from the Bluetooth device's list of previously paired devices.
Play Sound Effects
The FUSION-Link smartphone app on your compatible Apple or Android device allows you to adjust the
Fusion volume, change the source, control the playback function, and adjust some of the Fusion settings.
The app communicates with the Fusion via the Bluetooth connection for the mobile device. Connect your
compatible phone via Bluetooth to the Fusion to use the app.
For information about the FUSION-Link smartphone app for compatible Apple or Android devices, visit the
AppleApp Store or Google Play Store.
To play the FireWare Sound effects, select
screen in the app, you can pause tracks, adjust the volume, and switch between tracks. Using the menu
button at the top, you can then select a disc and choose the desired effect from the list of tracks.
ATTENTION!!
The FireWare Sound effects can be found on the USB stick in the USB port (no. 11).
It is recommended that you never remove it. Loss of the USB memory device is not covered by the
warranty!
www.FireWare.nl
• Press and
status,source, and station
and hold until you hear "Discoverable".
to hear information about the battery
on the Fusion or in the app the USB function. From the control
Afbeelding 2
FireWare Fusion 27