Remove Ytango From The Ear; Fitting Procedure And Configuration - ExSilent Ytango Mode D'emploi

The daily use of Ytango
Inserting a new soft dome into the ear can be
simplified by using some ear lubricant or crème
(a tiny amount is sufficient).
Attention: Be careful to make sure the ear
lubricant does not clog the sound opening of the
soft dome!
Ideally, the flat side of the module (where the
microphone is situated) will be flush to the
entry of the ear canal after insertion. In this
way, the device is practically invisible and the
sound optimal.
Make sure your hands are clean while inserting
the Ytango. Make-up, hand lotion, body oils, hair
gel, hairspray and similar products could make
the module dirty or contribute to clogging of the
microphone opening.
18 English
Removing Ytango from
the ear
Hold the cable firmly and pull it slowly out of the
ear. Remove Ytango module beyond your ear.
Fitting procedure and
configuration
The fitting procedure and configuration of
the hearing aid is both an important and
individual process. A specialized computer
program with specific connectors are available
to your dispenser to accomplish this. For this
reason, consult your dispenser for any fitting
or configuration changes. Your dispenser is the
authorized person to carry out any necessary
modifications.