BHOOP TAIYO 0500 Manuel Utilisateur page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

37
Pull up the two locking triggers on the right and left tube
38
Turn the handle downwards
39
Pull the front legs of the stroller backwards and they will automatically lock
with the side hook on the left. The closed stroller stands alone
OPENING OF THE STROLLER
40
Place the stroller upright and release the plastic hook on the left
41
The stroller opens by itself
42
Raise the handle until it is locked
43
Grasp the handle on the back of the backrest and rotate upwards until it
locks. To ensure that the lock is successful, push the seat downwards
44
Raise the front bar to lock it in
CAR SEAT MUHO
USE OF THE CAR SEAT
The frame of the Taiyo stroller It is compatible with the MUHO car seat with adap-
ters (included in Taiyo )
Remove the seat as in point 35.
45
Attach the adapters by inserting them in the side guides, with the button
towards the front, until you hear a locking click. ATTENTION: the adapters are right
and left and cannot be mounted inverted
46
Hold the handle of the MUHO car seat and place it over the adapters
47
Center the adapters under the handle and push the seat down to engage it
WARNING: make sure that the seat is properly hooked by
48
pulling the seat upwards
49
Press the two gray buttons on the handle and rotate it into a horizontal position
50
To release the seat, rotate the handle upwards by pressing the gray buttons
as in point 49
51
Press the two gray buttons on the seat side and pull up with two hands (for
safety) detaching the car seat from the adapters
52
Place it on the ground or on a stable surface and grasp the transport handle
53
To remove the adapters, press the two buttons on them and remove them
NOHA CARRYCOT
USE OF THE CARRYCOT WITH TAIYO
The frame of the Taiyo stroller it is compatible with Noha carrycot by means of
hooks positioned on Noha
Remove the stroller seat as in step 35.
54
Insert the side joints of the carrycot in the side rails of the frame and then push
down until you hear a CLICK . The carrycot is hooked. ATTENTION: check the cor-
rect hooking by pulling upwards
55
To release the carrycot, press the two buttons on the plastic joints and pull the
carrycot upwards with the handle
56
The carrycot handle is foldable to lower the canopy and to reduce clutter.
Press the two buttons on the sides of the handle and rotate it
57
To raise it, pull the handle and rotate it until it clicks in a vertical position
16

Publicité

Table des Matières
loading

Produits Connexes pour BHOOP TAIYO 0500

Table des Matières