BHOOP TAIYO 0500 Manuel Utilisateur page 15

straps in the lower fabric guides and the lap belt in those more internal in such
a way as to have a perfect adherence to the body of the child. When the child
grows, remove the ribbons from the guides and adjust accordingly. To adjust the
length of the shoulder straps and belts, pull the tape and adjust the buckles as
shown in photo
WARNING: always use 5-point belts
ADJUST THE BACKREST AND THE FOOTREST
25 To lower or raise the backrest, pull the handle on the back of the backrest.
26 The backrest is adjustable in 3 positions
27 Pull the handle under the footrest to lower it. To raise it push upwards
BASKET ASSEMBLY
28 Insert the Velcro straps into the slots of the footrest on the frame. Pull and lock
with Velcro
29 attach the rear part with the press-studs, passing the basket over the rear
frame tube
WARNING: do not load the basket with more than 3 kg to
avoid problems with the stability of the frame
REAR TWIN BRAKE
30 Rear wheel brake: to apply the brakes, lower
the locking lever as shown in the photo
30a Raise the brake lever to unlock the stroller.
FRONT WHEEL WHEELS
31 To release the front wheel and make it swivel, raise the lever on the front of
the wheel joint. Lower the lever and lock the wheel. NOTE: the wheel will lock au-
tomatically when the lever is lowered. It is not necessary to reposition the wheel
ATTENTION: it is advisable to use the locked wheels on
straight.
uneven ground to get more maneuverability
31a Quick front wheel removal: press the
button and quick release of the front wheel,
the front wheels will be unlocked automatically.
REAR AND FRONT WHEELS
32 The rear wheels, and also the front ones, are removable with a double Allen
key (internal and external). Unscrew to remove the wheels if necessary , clean
them gently and reassemble.
PUSHCHAIR CLOSURE
The stroller can be closed with the seat hooked both facing mum and facing the
street. For an even more compact closure, release the seat
Remove the baby
To close the stroller without a seat, proceed as in step 35. If you do NOT want to
remove the seat, skip point 35.
33 Hold a hand under the leg rest and at the same time grasp the handle on the
back of the backrest
34 Pull the handle and push the backrest forward until you hear a click to attach
it to the leg rest
34a Turn the closed seat forward
35 Press the two small buttons on the sides of the seat and pull upwards
36 Release the second safety on the right tube by rotating it downwards with
your thumb
15