WIKA E-10 Mode D'emploi page 26

9. Specifications
Further details on: Process connection
Possible restrictions
EN
NBR
FPM/FKM
Electrical connection
Connection type
½ NPT male conduit, with
potted cable outlet
1) The stated IP codes only apply when plugged in using mating connectors that have the appropriate IP code.
2) For IP code IP67 the ambient temperature range is limited to -40 °C ... +80 °C [-40 ... +176 °F].
Pin assignment
½ NPT male conduit, with potted cable outlet
26
Depending on the choice of sealing on the process connection, there may be restrictions in the permissible
medium and ambient temperature range.
-30 ... +100 °C [-22 ... +212 °F]
-15 ... +102 °C [5 ... 215 °F] / -15 ... +105 °C [5 ... 221 °F]
IP code Wire cross-
1) 2)
section
IP67 3 x 0.5 mm²
AWG20
2-wire 3-wire
U+ Red Red
U- Black Black
S+ - Brown
Shield Shield connected to case
WIKA operating instructions pressure transmitter, models E-10 and E-11
Cable diameter Cable lengths
6.8 mm [0.27 in] 2 m
■
5 m
■
10 m
■
Legend
U Positive power supply terminal
+
U- Negative power supply terminal
S+ Analogue output
Cable material
Polyolefin copolymer