Dräger Panorama Nova P Mode D'emploi page 15

Replacing the exhalation valve disc
Replace the exhalation valve disc (see "Visual inspection of
exhalation valve" on page 13).
Fit the exhalation valve cover. Ensure that it engages.
Replacing the inhalation valve or valve disc
Pull the equipment connector out of the mask body (see
"Replacing the equipment connector" on page 14).
Remove the old valve disk and fasten the new disk.
Insert the equipment connector in the mask body (see "Replacing
the equipment connector" on page 14).
Storage
Loosen the straps as far as possible (handle tab).
Wipe uncoated visors with an anti-static tissue. Do not wipe
coated visors.
Pack the mask in its bag or storage box.
Store it in a dry, dust-free place where it is not deformed.
Storage temperature -15 °C to +25 °C.
Keep out of direct sunlight and heat.
Observe ISO 2230 "Rubber Products - Guidelines for Storage", and
national guidelines for the storage, maintenance and cleaning of
rubber products.
Dräger rubber products are treated with an agent to protect against
premature ageing which in some cases is visible as a grey-white
coating. This coating can be washed off with a brush and soapy water.
Order List
Designation and description
Panorama Nova – EPDM – PC – P
Panorama Nova – EPDM – PC/CC – P
Panorama Nova – EPDM – L – P
Panorama Nova – EPDM – PC – P – K/rt
Panorama Nova – EPDM – PC – P – K/rt – textile R 59 024
Panorama Nova – EPDM – PC/CC – P – with filter R 55 073
Panorama Nova – SI – PC – P
Panorama Nova – SI – PC/CC – P
Mask spectacles
"klar-pilot" gel
Sekusept Cleaner
Incidur
Carry-box Mabox I
Carry-box Mabox II
Carry-box Wikov V
Order No.
R 52 972
R 54 215
R 52 992
R 54 450
R 53 070
R 54 216
R 51 548
R 52 560
79 04 071
79 04 072
R 53 680
R 54 610
R 51 019
15