Control panel
1
Programme knob and
1
Function buttons
2
Start/Pause button
3
Delay Start button
4
Function status led:
5
– Delay time lights
Before first use
Warning! If the appliance was not
transported in an upright position, leave it
to stand for 12 hours before connecting it to
the electricity supply and using it for the first
time, so that the oil can flow back to the
compressor. Otherwise the compressor could
be damaged.
At the beginning of drying cycle (3-5 min.)
there could be a slightly higher sound level. It is
because of start of the compressor that is nor-
www.zanussi.com
OFF switch
2
–
Drying light
–
Anticrease/End light
–
Condenser light
–
Filters light
–
Water Reservoir light
In order to remove any residues which may
have been produced during production, wipe
the dryer drum with a damp cloth or carry out a
brief drying cycle (ca. 30 min.) with damp
cloths in the machine.
mal for compressor powered appliances such:
refrigerators, freezers .
5
4
3
55