Saving The Measuring Result; Managing The Saved Measuring Results - WIKA GA11 Mode D'emploi

5. Commissioning, operation
5.7

Saving the measuring result

The easiest way is to use the name allocation in advance on a PC. You can create a
name list (separated by commas) and load it into the analytic instrument via the USB
interface (see chapter 6.4 "Importing/exporting the list of measurement names via USB
interface").
5.8

Managing the saved measuring results

The main menu "Data management" must be enabled in order to access the data
management of the analytic instrument.
5.8.1 Internal memory
The internal memory can save up to 500 data records.
Depending on system setting, when the memory limit is reached, the instrument will
either send an error message or automatically overwrite the oldest data records without
warning (see chapter 6.4 "Importing/exporting the list of measurement names via USB
interface"). The data records deposited in the internal memory can be transmitted to a
USB data carrier.

WIKA operating instructions analytic instrument, model GA11
  


Data record list

Detail window of the selected

data record
Deletes the selected data

record
Opens the data record details

in a magnified window
Saves the selected data

record on the USB data carrier
Memory utilization in %

Delete all data records

Save all data records to the

USB data carrier


Measurement
Data manage-
ment
Settings
21
EN