Display Components - Vestfrost ULTF-37 Notice D'utilisation

EN

Display components

LEDS
Each LED function is described in the following table.
LED MODE
ON
Flashing
ON
ON
ON
Flashing
Flashing
°C/°F ON
°C/°F Flashing
Buttons
SET
To display target set point in programming mode it selects a parameter og
confirm an operation.
(UP) To enter fast access menu In programming mode it browses the
parameter codes or increases the displayed value.
(DOWN) In programming mode it browses the parameter codes or de-
creases the displayed value.
DATA
Export data from button.
Not relevant.
REC
Log activation and deactivation from button (Password protected).
Function
Compressor enabled
Anti-short cycle delay enabled
An alarm is occurring
Recording activated
Battery status OK
Battery is being charged
Charging problem or battery failure
Measurement unit
Programming phase
Vestfrost Solutions 13