Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems
The appliance does not start cool-
ing after connect to electrical power
supply.
Cooling is not enough.
Too much noise
LED lamp is not light up
Technical specification
Item no.: 233689
Operating voltage and frequency: 220-240V~ /50 Hz
Rated input power: 162W
Rated current: 1,8A
Setting temperature: Setting from -24°C to -20°C
Net weight (approx.): 38kg
Protection class: Class I
Remark: Technical specification is subjected to change without prior notification.
Possible cause
Thermal cut-out activated
The compressor is defective.
The power plug/inlet is not connected
properly with the power supply.
The appliance is under strong sun-
light radiation or close to a heat
source.
The doors are not properly closed or
the sealing gasket is defective.
Too much food is placed inside the
appliance.
Surrounding ventilation is insuffi-
cient.
The appliance is not placed horizon-
tally.
The appliance touches surrounding
wall or other objects.
There are some loose parts inside the
appliance.
The LED is defective
Climate class: 4
Refrigerant used and injection quantity: R290 / 63g
Flammable foaming agent: C
Inside capacity: 77L (4x1/3 GN or 8x1/6 GN, not
supplied)
Outer dimension: 805x666x(H)305mm
Noise level: <70dB(A)
Possible solution
Contact with the supplier/service
provider for repair.
Check the connection and make sure
all the connections are correctly con-
nected.
Move the appliance a new location to
avoid direct sunlight.
Close the doors properly.
Place less food inside the appliance.
Check that if sufficient ventilation is
provided by allowing at least 10cm
away from other objects or wall.
Check to make sure the appliance is
placed horizontally.
Check to make sure that at least
10cm away from other objects or
wall.
Contact with the supplier/service
provider for repair.
Contact with the supplier/service
provider for repair.
H
5
10
EN
9
Publicité
