Loading Cutlery And Dishes - AEG FAVORIT 55200VI Notice D'utilisation

34

Loading cutlery and dishes

Do these steps to fill the rinse aid dispenser:
1. Press the release button (A) to open the rinse aid dispenser.
2. Fill the rinse aid dispenser with rinse aid. The maximum level is shown by "max".
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during
the subsequent washing programme.
4. Close the rinse aid dispenser.
The capacity of the rinse aid dispenser is approximately 150 ml. The quantity of rinse aid is
sufficient for approximately 60 washing programmes.
Adjust the dosage of rinse aid
The appliance is set at the factory at level 1.
You can set the dosage between 1 - 6 (1- 6 ml of the rinse aid).
To adjust the dosage of rinse aid, refer to the washing results ("What to do if..."). Start with
the lowest dosage.
Turn the arrow clockwise to increase the dosage.
Increase the dose if there are water droplets or limescale on the dishes.
LOADING CUTLERY AND DISHES
Helpful hints and tips
CAUTION!
Only use the appliance for household utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb water (sponges, household cloths,
etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.