AutoAqua Smart AWC touch SAWC-200P Mode D'emploi page 9

Icons & Buttons for Setting
1
No. Icon/Button Function
1
2
3
4
5
6
7
*During water change process, pressing
return to the previous AWC MANUAL / AUTO setting status. Also, ATO will be
forced to be turned off if its previous status is on and at the same time the
controller will give a five-second audible and visual alert (ATO flashing
2 3 4
Turn ATO on or off
Choose AWC mode : MANUAL / AUTO or turn AWC off
1. Start the AWC process
2. Pause / resume the AWC process
3. Dismiss alarm
Choose the setting item in the AWC MANUAL / AUTO mode
Increase time / speed
Decrease time / speed
1. Wake up the LCD display
2. Dismiss alarm
3. Return to AWC setting page*
4. Resume the process
5. Reset (hold at least for 8 seconds)
5
6
button will stop the process and
7
OFF OFF OFF
English
).
08