AutoAqua Smart AWC touch SAWC-200P Mode D'emploi page 13

Power Outage Security Measures
1. ATO will be turned off automatically (ATO flashing
power as if its previous status is on. It will be turned back on after 15 minutes
automatically. Users could also turn it back on manually.
2. When the power outage occurs during the draining or refilling process, the
process will be delayed for 15 minutes after restoration of power and then resume.
3. When the power outage occurs during the countdown to water change (the
timer will pause during power outage)*, the timer will retain the record and
resume after power outage.
* Since the timer is not running during a power outage, the next water change process will be delayed.
For example, if a water change process is set to be started at 3 p.m., however, a power outage occurs
during the countdown and lasts for one hour, the next water change process will be started at 4 p.m.
Programming
1. AWC MANUAL Mode (One-time AWC)
In this mode, users have to manually start the AWC process.
1) Touch
2) Touch
* Please refer to Refilling Speed Setting.
3) Touch
*When water change is done,
to choose AWC MANUAL mode.
to set the refilling speed if needed.
to start water change process.*
flashes for 3 minutes with 5 beeps at last.
OFF OFF OFF
) after restoration of
English
12