AutoAqua Smart AWC touch SAWC-200P Mode D'emploi page 6

English
Step 2 :
Connect ATO refill
tube (pump
breaker*
holder).
Tank/Sump
Air In
Water Out
05
Step 3 :
Connect ATO refill
pump's cable to P1.
siphon
tubing
*Note : Place siphon breaker inside the tank/sump but
above the water level.
Air In :
Siphon breaker allows air in to break the siphon
when the pump turns off.
Water Out :
Water drops out of the hole are normal when
the pump is on.
Arrow on siphon
breaker indicates
water flow direction.
ATO Refill Pump
ATO Reservoir