About This Guide; Extended Warranty - Radiodetection RD5000 WL Guide D'utilisation

Preface

About this guide

This guide provides basic operating instructions for the RD5000
locator and transmitter. It also contains important safety information
and guidelines and as such should be read in its entirety before
attempting to operate the RD5000 locator and transmitter.
It is also highly recommended to register the RD5000 locator and transmitter
for the free 3 year extended warranty.
™
4

Extended Warranty

Thank you for purchasing the RD5000 ™
RD5000 locators and transmitters are covered by a 1 year warranty. It is highly
recommended to register the RD5000 locator and transmitter for the free 3 year
extended warranty.
Registration and extended warranty are free and once registered users will be
entitled to free software updates.
To be eligible, customers must register each product within 3 months of purchase.
Upon registration customers will receive confirmation of registration by email
and this email will include a download key, this key will be required for software
updates to your RD5000 locator and transmitter.
When new software is released, registered users will receive a notification email
that links to the new software download page on the Radiodetection website.
After 12 months from purchase, the registered user will be notified and offered
the chance to validate the calibration of the RD5000 locator using eCAL.
To register for extended warranty go to:
www.radiodetection.com/extendedwarranty
eCAL
™
The RD5000 has been designed so that it does not require regular calibration.
However, as with all safety equipment, it is recommended that a service should
be carried out at least once a year either at Radiodetection's service centre or
an approved Radiodetection service centre. Alternatively eCAL
validate the calibration of the RD5000 locator.
eCAL is a novel Radiodetection technique that allows the user to validate the
original factory calibration of the RD5000 locator, providing the user with the
confidence that the locator continues to meet its original factory calibration.
eCAL also carries out a functional test on the locator providing the user with
the confidence that the locator continues to provide the same performance
as it did when it first left the factory. eCAL can be carried out on site without
the need to return the locator to a service centre, saving time and expense.
Each time the locator passes eCAL, the user can view or print a dated eCAL
validation certificate.
For a more detailed explanation of eCAL, please go to the eCAL section on
page 16.
locator and transmitter.
™ may be used to
5